Air Purifying Respirators

The Advantage 3200 Full-Face Respirator incorporates MSA’s global engineering expertise and is designed to meet NIOSH and EN standards. The respirator features a wraparound lens combined with a soft, pliable silicone facepiece that provides a total solution to your air-purifying respirator needs. Its fit technology is based on the proven faceseal of the Ultra Elite Facepiece, which was based on facial measurements from more than 8,000 people. For the utmost in convenience, the Advantage 3200 uses the same cartridges and filters as the Advantage 200 LS Respirator. The Advantage 3200 Respirator enhances worker performance through a new design that allows even lower breathing resistance and includes a standard nosecup that reduces fogging in low temperatures or high humidity conditions.
In addition, the facepiece lens has a scratch-resistant coating and has been engineered to be optically correct, giving you superior visibility and peripheral vision. Donning the mask is made easier with pre-adjustable rubber straps. With the Advantage 3000 Respirator, you can set the position of the upper straps to receive a consistent fit, time after time. In addition, the preset upper straps prevent uncomfortable snags during donning and doffing, and also provide a tighter, more secure seal. Wearers also can choose the new European-style Advantage harness, which dons like a catcher’s mask.

 Powered Air Purifying Respirators

The OptimAir 6A powered air-purifying respirator (PAPR) provides respiratory protection by filtering contaminants from ambient air and providing air flow to either a facepiece or hood (with HEPA filters only) at a rate equal to or exceeding National Institute for Occupational Safety and Health (NIOSH) standards.

The OptimAir 6A powered air-purifying respirator (PAPR) with Ultravue, Comfo, Comfo Elite, or Comfo Welder's facepieces or Tyvek hood has approvals from the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA). Filters and cartridges are covered by separate approval.  Cartridges must be replaced whenever air flow drops below four cubic feet per minute (115 lpm) with tight-fitting facepieces, six cubic feet per minute (170 lpm) with the Tyvek hood or when the user smells or tastes the contaminant.

          Applications

          Asbestos Abatement
          Chemical
          Electric Utility
          Hazardous Materials
          Nuclear
          Oil and Gas
          Paper & Pulp
          Sanding & Grinding
          Toxic Atmosphere Non-IDLH
          Welding 

The OptimAir 6A powered air-purifying respirator (PAPR) can be used with an entire family of filters, chemical cartridges and combination cartridges for protection against particulates, toxic gases and vapors or a combination of these hazards. Requiring two filters, the unit is available with full- or half-mask facepiece, or hood. The belt-mounted motor/blower assembly includes an efficient 4.6 volt motor which has a long service life. The motor/blower assembly features threaded connectors for quick and easy attachment of OptiFilter cartridges.

SCBA's

Casper Safety LLC currently has two types of SCBA's available to rent; SCOTT & MSA. Both kinds of SCBA's are kept up to date, flow tested, and hydrotested on all benchmark dates.For more information on each type feel free to look at SCOTT SCBA's  and MSA SCBA's. Both are quality pieces of equipment that will protect you and your employees through any hazard.